MPRX Four Port.
Wayside rail identification.
A rugged TransCore® RFID reader for wayside automatic identification of locomotives, railcars and rail assets. Sentinel supplies and supports the product for rail applications.
TransCore MPRX Four Port Wayside RFID Reader
Model 10-7210-001
The Four Port configuration is designed for wayside rail applications where multiple antenna connections are required. Use it as part of an automatic equipment identification or asset identification architecture.
- Four multiplexed antenna ports for wayside applications
- Reads major UHF RFID tag formats used in rail applications
- Super eGo® (SeGo), eGo (ISO 18000-6B), ATA and IAG support
- Ethernet, RS-422 and RS-232 communications
- Rugged enclosure for demanding wayside environments
Specification at a glance.
Verify final specifications against the applicable TransCore documentation and project requirements before procurement.
| Model | 10-7210-001 |
| Application | Wayside rail |
| Antenna ports | 4 (multiplexed) |
| Frequency | 902–928 MHz (fixed) |
| Protocols | ATA (ISO 10374), Super eGo® (SeGo), eGo (ISO 18000-6B), IAG |
| Communications | Ethernet (10/100), RS-422, RS-232 |
| Input power | +12–110 VDC (wayside) |
| RF output power | 17–32 dBm (adjustable in 1 dB steps) |
| Enclosure | IP65/67 rated with appropriate connectors |
| Operating temperature | −40°C to +70°C |
| Dimensions (L×W×H) | 33 × 7.62 × 6.32 cm (13 × 5 × 2.49 in) |
| Weight | 2.6 kg (5.7 lb) |
| Typical read range | 3.7–5.2 m (12–17 ft)* |
| AU compliance | ACMA-compliant firmware available† |
†ACMA compliance is a firmware configuration confirmed at time of order, not a fixed property of the hardware.
Where wayside RFID can fit
Railcar & locomotive ID
Automate identification as rail vehicles pass a wayside reader point.
Maintenance & fuel tracks
Support controlled facility workflows with automatic asset identification.
Intermodal operations
Use wayside identification as part of intermodal and yard asset workflows.
Questions about the Four Port MPRX?
What is the MPRX Four Port used for?
It is intended for wayside rail applications and supports up to four multiplexed antenna connections.
What model is the Four Port MPRX?
The Sentinel product page identifies the TransCore MPRX Four Port Wayside RFID Reader as model 10-7210-001.
Can Sentinel help specify a wayside RFID installation?
Yes. Sentinel can help scope the reader and application requirements around the intended trackside installation and wider identification workflow.
Need help selecting the right MPRX configuration?
Tell us whether the requirement is onboard, wayside or part of a wider rail integration and we'll help you work through the application.